Vertical and horizontal environmental DNA (eDNA) patterns of fish in a shallow and well-mixed North Sea area

Occurrence
Dernière version Publié par Flanders Research Institute for Agriculture, Fisheries and Food (ILVO) le juin 21, 2024 Flanders Research Institute for Agriculture, Fisheries and Food (ILVO)

Téléchargez la dernière version de la ressource en tant qu'Archive Darwin Core (DwC-A), ou les métadonnées de la ressource au format EML ou RTF :

Données sous forme de fichier DwC-A (zip) télécharger 94 281 enregistrements dans Anglais (6 MB) - Fréquence de mise à jour: non planifié
Métadonnées sous forme de fichier EML télécharger dans Anglais (13 KB)
Métadonnées sous forme de fichier RTF télécharger dans Anglais (11 KB)

Description

This dataset contains eDNA metabarcoding data of fish species detected in 17 locations in the Belgian Part of the North Sea (BPNS). The seawater samples were collected during a field campaigns in 2022. The fish species were identified using 12S eDNA metabarcoding. The dataset includes amplicon sequence variants and their associated metadata.

[This dataset was processed using the GBIF eDNA converter tool.]

Enregistrements de données

Les données de cette ressource occurrence ont été publiées sous forme d'une Archive Darwin Core (Darwin Core Archive ou DwC-A), le format standard pour partager des données de biodiversité en tant qu'ensemble d'un ou plusieurs tableurs de données. Le tableur de données du cœur de standard (core) contient 94 281 enregistrements.

1 tableurs de données d'extension existent également. Un enregistrement d'extension fournit des informations supplémentaires sur un enregistrement du cœur de standard (core). Le nombre d'enregistrements dans chaque tableur de données d'extension est illustré ci-dessous.

Occurrence (noyau)
94281
dnaDerivedData 
94281

Cet IPT archive les données et sert donc de dépôt de données. Les données et métadonnées de la ressource sont disponibles pour téléchargement dans la section téléchargements. Le tableau des versions liste les autres versions de chaque ressource rendues disponibles de façon publique et permet de tracer les modifications apportées à la ressource au fil du temps.

Versions

Le tableau ci-dessous n'affiche que les versions publiées de la ressource accessibles publiquement.

Comment citer

Les chercheurs doivent citer cette ressource comme suit:

Dukan N, Cornelis I, Brosens D, Derycke S (2024). Vertical and horizontal environmental DNA (eDNA) patterns of fish in a shallow and well-mixed North Sea area. Version 1.5. Flanders Research Institute for Agriculture, Fisheries and Food (ILVO). Occurrence dataset. https://ipt.inbo.be/resource?r=ilvo-metabarcoding-1&v=1.5

Droits

Les chercheurs doivent respecter la déclaration de droits suivante:

L’éditeur et détenteur des droits de cette ressource est Flanders Research Institute for Agriculture, Fisheries and Food (ILVO). Ce travail est sous licence Creative Commons Attribution (CC-BY) 4.0.

Enregistrement GBIF

Cette ressource a été enregistrée sur le portail GBIF, et possède l'UUID GBIF suivante : 8afcc57c-5d2b-4349-add6-29bfc33ed5cb.  Flanders Research Institute for Agriculture, Fisheries and Food (ILVO) publie cette ressource, et est enregistré dans le GBIF comme éditeur de données avec l'approbation du Ocean Biodiversity Information System.

Mots-clé

Occurrence; eDNA; North Sea; trawl

Contacts

Nergiz Dukan
Dimitri Brosens
  • Créateur
Research Institute for Nature and Forest/ Belgian Biodiversity Platform
BE
Sofie Derycke
  • Personne De Contact
ILVO
BE

Couverture géographique

Belgian part of the North Sea

Enveloppe géographique Sud Ouest [-90, -180], Nord Est [90, 180]

Méthodes d'échantillonnage

1.Sampling was carried out between September 26 and October 7, 2022 at the Belgium Part of the North Sea (BPNS) with the research vessel Belgica. Water samples were collected approximately 1 m above the seafloor at 17 locations covering the distribution of the three distinct fish communities (coastal, transition and offshore) (Figure 1). At twelve locations, water was sampled both at the surface and bottom to study the vertical distribution pattern of eDNA. A rosette equipped with 10 L Niskin bottles was deployed to collect the water samples: bottom samples were taken 1 meter above the seabed and surface samples 1 meter below the sea surface. Prior to deployment, the rosette was held below the surface for three minutes to allow the Niskin bottles and the CTD to equilibrate with the surrounding water mass. To minimize the potential disturbance of eDNA caused by the downward movement of the rosette, the surface samples were collected before the bottom samples. Five biological replicates were collected at each location and depth, with each replicate corresponding to a single Niskin bottle. From each Niskin bottle, 2 L seawater was pre-filtered through a 200 µm sterilized nylon mesh to remove bigger particles and organisms that can potentially cause clogging during the subsequent filtering process. Filtering of the samples was conducted onboard in a dedicated lab for eDNA analyses, right after the sample collection. The samples were filtered through a 0.45 µm Sterivex-HV filter (Millipore SterivexTM, PVDF, with Luer outlet) using a peristaltic pump (Masterflex L/S® Variable Speed Pump HV-77910-75) until the filter was close to clogging. 2. Quality control Negative control samples were collected in the field and laboratory environments. Negative field controls were taken by collecting commercial source water from the Niskin bottles after they were carefully rinsed using commercial source water, also using the prefilter. Negative filter controls were included by filtering source water over a blanco 0.45 µm Sterivex filter. Negative extraction controls were included by applying the extraction protocol on blanco 0.45 µM Sterivex filters. Negative PCR controls were included by replace the extracted eDNA with 3 µl of UltraPure™ water.

Etendue de l'étude The integration of eDNA metabarcoding into monitoring programs provides valuable information about fish community structures. Despite the growing body of evidence supporting the method's effectiveness in distinguishing fine-scale eDNA signals, there is a limited understanding of eDNA distribution in shallow, well-mixed environments, especially related to sampling depth. We analyzed 167 samples collected from the surface and bottom water at 17 locations of the Belgian Part of the North Sea (BPNS) and compared this to beam trawl catch data collected simultaneously at the same locations.

Description des étapes de la méthode:

  1. 1. eDNA extraction and Library preparation. After overnight incubation with the lysisbuffer at 56°C, the eDNA was extracted using the DNeasy Blood and Tissue kit (Qiagen). Library preparation The genetic analysis was based on 12S. A one-step amplification protocol was used in triplicate using fusion primers (Sigma Aldrich), which contained the template specific primer sequence and a unique barcode tag of 6 to 10 nucleotides. After amplification, the PCR replicates were pooled and purified using magnetic CleanNGS beads (CleanNA). After purification, the three 12S libraries were quality checked on the BioAnalyzer. The eDNA libraries were sequenced with Illumina MiSeq, 2 x 300 bp. 2. Bioinformatic processing The quality of the raw Illumina MiSeq sequencing reads was verified with FASTQC v0.11.9. The paired-end reads were then reorientated, demultiplexed and trimmed by using cutadapt. After demultiplexing, DADA2 was used for denoising, dereplication, merging, and removing of chimeric reads from the demultiplexed sequences. The taxonomic assignment of the resulting ASV sequences was performed against a custom made reference database using RDP classifier in DADA2 with a minimum bootstrapping support of 80. ASVs that remained unassigned at species level with RDP were successively run with BLASTn v2.12.0 against the custom made reference databases and the GenBank nucleotide database (from march 2023). After taxonomic assignment, the count table was cleaned by using MicroDecon using the field, filter, DNA extraction and PCR negative control samples.

Métadonnées additionnelles

Identifiants alternatifs 8afcc57c-5d2b-4349-add6-29bfc33ed5cb
https://ipt.inbo.be/resource?r=ilvo-metabarcoding-1